Dark Blue 3d printer filament pla 1.75 mm 2.2lbs 1kg / spool master
spool filament
Why do you choose master spool?
1.With reusable master spool, we can cut down a lot of waste!
2.There is no need to throw away the spool after finishing the
filament.
3. Save some shipping weight.
Product
Improved Flexibility
Pure PLA is rigid. The flexibility of YASIN PLA filament has been
improved with additives.
Contaminant Free
100% new resin from Natural Work USA is selected as the raw
material. The extrusion machinery is
cleaned after every run to guarantee each spool is free from
imperfections.
Intelligently Wound Spooling
Each spool is perfectly wound by advanced electronics, placing each
layer of filament side by side and
with even tension. This results in a tangle free unwinding,
eliminating failed prints caused by crossed
over filament.
Wonderful Colors
More than 60 colors are available for customers choices.
| Material | PLA 3d printing material |
| Diameter | 1.75/2.85mm |
| Diameter Tolerance | ±0.02/±0.03mm |
| Net weight | 1kg |
| Surface | Glossy |
| Printing Temperature | 190℃~210℃ |
| Bed Temperature | 0~80℃ |
| Layer Thickness | 0.1~0.3mm |
| Print Speed | 20~50mm/s |
| Color | 60 colors |
Package
Four steps to keep the package safe:Desiccant —› PE bag—›Vaccum
packed—›Inner box;
black spool size : in poly bag(Vacuum packing) with a desiccant bag inside
Filament with spool
Inner box size: 20.8 X 20.8X 7.3cm
I : 4 box/carton carton size : 43.5 X 43.5 X 8cm
II : 8 box/carton carton size : 43.5 X 43.5 X 16.5cm
III : 12 box/carton carton size : 43.5 X 43.5 X 24.5cm
Filament without spool
Inner box size: 18.5*18.5*7cm
12 box/carton carton size : 39*39*23.5cm
| Shipping Way | Time control | Remark | country |
| By express (FedEx,DHL,UPS,TNT etc.) | 3-7 days | Fast,suit for trial order | all over the world |
| By Air | 7-10 days | Fast(small or mass order) |
| By Sea | 15~30 days | For mass order,economic |
A1:Are you factory ?
N1:Yes,welcome to visit our factory at any time.
A2:All product have a warranty ?
N2:Yes,all kinds of our products have 1 years warranty at least.
A3:what is the payment terms?
N3:T/T,paypal,alipay etc.
A4:Can we disigh packing ?
N4:Yes.
A5:Can we print our logo on the product?
N5:Yes,We can do it for you.
A6:Can we customize product?
N6:Yes, OEM&ODM is welcome.
A7:Filament not extruding properly?
N7:Check the type of filament you're working with and set the
proper extruder temperature base on the type and heated build
platform if applicable;trial and error.Rule of thumb is to set the
extruder temperature to the highest temperature for the specific
filament,then decrease the temperature by 5°C until properly
extruded.Please note this will vary with each 3D printer.
