Red Color Empty Plastic Rod 1.75mm 1kg PLA ABS 3d Printing Filament
Why do you choose master spool?
1.With reusable master spool, we can cut down a lot of waste!
2.There is no need to throw away the spool after finishing the
filament.
3. Save some shipping weight.
Product
PLA (Polylactic acid) is thermoplastic aliphatic polyester made of renewable resources
like corn or starch. Its extrusion-temperature is much lower than
ABS, and most often doesn't require a heated bed. It has the
following characteristics:
Good toughness high strength, high stiffness ;
No block nozzle, good stick hot bed, a smooth PLA used
Can be processed at 185 degrees
Low shrinkage, thermoforming dimensional stability
| Material | PLA 3d printing material |
| Diameter | 1.75/2.85mm |
| Diameter Tolerance | ±0.02/±0.03mm |
| Net weight | 1kg |
| Surface | Glossy |
| Printing Temperature | 190℃~210℃ |
| Bed Temperature | 0~80℃ |
| Layer Thickness | 0.1~0.3mm |
| Print Speed | 20~50mm/s |
| Color | 60 colors |
| PLA Color list | 65 colors |
| Twinkling Transp Blue | Silk White | Pink to Natural By Temperature | Pastel Green | Copper Filled Filament |
| Transparent | Silk red | Orange Red To Natural By Temperature | Light Green | Red Copper Filled Filament |
| China Red | Silk Purle | Blue To Natural By Temperature | Transp Green | Aluminum Filled |
| Red | Silk Green | Grey To Natural By Temperature | Green | Iron Filled Filament |
| Transp Blue | Silk Pink | Natural To Purple By Light | Dark Green | Tungsten Filled Filament |
| Light Blue | Silk Blue | Baby Pink | Transp Orange | Brass Filled Filament |
| Blue | Silk Yellow | Baby Blue | Orange | Carbon Fiber |
| Pearl Orange | Glow Green | Pearl Gold | Dark Orange | Bronze Filled Filament |
| Ivory | Glow Blue | Grey | Pink | soft PLA White |
| Skin Color | White | Pastel Yellow | Transp Purple | soft PLA Red |
| RAL 7047 Tele Grey 4 | 9010 Pure White | Transp Yellow | Purple | soft PLA Grey |
| Dark Blue | Pearl White | Yellow | Transp Red | soft PLA Black |
| Coffee Color | Red-Brown | Dark Yellow | Black | Golden Silver |
Package
Four steps to keep the package safe:Desiccant —› PE bag—›Vaccum
packed—›Inner box;
black spool size : in poly bag(Vacuum packing) with a desiccant bag inside
Filament with spool
Inner box size: 20.8 X 20.8X 7.3cm
I : 4 box/carton carton size : 43.5 X 43.5 X 8cm
II : 8 box/carton carton size : 43.5 X 43.5 X 16.5cm
III : 12 box/carton carton size : 43.5 X 43.5 X 24.5cm
Filament without spool
Inner box size: 18.5*18.5*7cm
12 box/carton carton size : 39*39*23.5cm
| Shipping Way | Time control | Remark | country |
| By express (FedEx,DHL,UPS,TNT etc.) | 3-7 days | Fast,suit for trial order | all over the world |
| By Air | 7-10 days | Fast(small or mass order) |
| By Sea | 15~30 days | For mass order,economic |
PackageRFQ
A5:Can we print our logo on the product?
N5:Yes,We can do it for you.
A6:Can we customize product?
N6:Yes, OEM&ODM is welcome.
A7:Filament not extruding properly?
N7:Check the type of filament you're working with and set the
proper extruder temperature base on the type and heated build
platform if applicable;trial and error.
Rule of thumb is to set the extruder temperature to the highest
temperature for the specific filament,then decrease the temperature
by 5°C until properly extruded.
Please note this will vary with each 3D printer.
