Grey Color No Spool Refills PLA ABS 3D Printing Filament For 3D
printer
Why do you choose master spool?
1.With reusable master spool, we can cut down a lot of waste!
2.There is no need to throw away the spool after finishing the
filament.
3. Save some shipping weight.
Product
PLA (Polylactic acid) is thermoplastic aliphatic polyester made of renewable resources
like corn or starch. Its extrusion-temperature is much lower than
ABS, and most often doesn't require a heated bed. It has the
following characteristics:
Good toughness high strength, high stiffness ;
No block nozzle, good stick hot bed, a smooth PLA used
Can be processed at 185 degrees
Low shrinkage, thermoforming dimensional stability
| Material | PLA 3d printing material |
| Diameter | 1.75/2.85mm |
| Diameter Tolerance | ±0.02/±0.03mm |
| Net weight | 1kg |
| Surface | Glossy |
| Printing Temperature | 190℃~210℃ |
| Bed Temperature | 0~80℃ |
| Layer Thickness | 0.1~0.3mm |
| Print Speed | 20~50mm/s |
| Color | 60 colors |
Package
Four steps to keep the package safe:Desiccant —› PE bag—›Vaccum
packed—›Inner box;
black spool size : in poly bag(Vacuum packing) with a desiccant bag inside
Filament with spool
Inner box size: 20.8 X 20.8X 7.3cm
I : 4 box/carton carton size : 43.5 X 43.5 X 8cm
II : 8 box/carton carton size : 43.5 X 43.5 X 16.5cm
III : 12 box/carton carton size : 43.5 X 43.5 X 24.5cm
Filament without spool
Inner box size: 18.5*18.5*7cm
12 box/carton carton size : 39*39*23.5cm
| Shipping Way | Time control | Remark | country |
| By express (FedEx,DHL,UPS,TNT etc.) | 3-7 days | Fast,suit for trial order | all over the world |
| By Air | 7-10 days | Fast(small or mass order) |
| By Sea | 15~30 days | For mass order,economic |
Characteristics
1.PLA can be processed in low temperature
2.PLA with 3mm can be processed in 185,PLA tastes like fried corn
With high intensity and stiffness, PLA can print structure parts of
3D printer for DIY users
3.PLA enjoys excellent formability, low thermal denaturation and
only 0.3% shrinkage,
making firm adhesion between layers
3.PLA has bright colors and can be made semi-transparent
4.PLA, as an environment biomaterial is extracted from corn
5.Have good surface gloss and smoothness,sends out noodors in
processing
6.PLA can avoid curling and warping in printing
How about QC?
1.Our raw material is imported with top quality. And will be double
QC before putting in the warehouse.
2.There're one alarm in the machine itself for testing the
diameter. Once the tolerance is over 0.02mm for Grade-A
quality,it'll alarm.
3. Although the machine is automatic,but we'll have one person be
there for a double checking. And it'll experience two time QC
before entering into the warehouse."
