Fireproof 1.75mm PLA 3D Printer Filament For 3D Electronics / 3D
Pen / FDM Printer
PLA datasheet.pdf
- PLA+ performance. Superior than normal PLA on market.
- 100% virgin material without cheap plastic fillers or regrind.
- Specific plasticizer is added to increase the toughness. Vacuum
sealed with desiccant.
- Update formula to increase toughness, impact strength and
elongation at break.
- Better extruding performance to avoid clogging, wrinkling, blobs,
rough and uneven surface.
- Easier stick to hot bed to solve first layer issue. Advanced
spooling technique to avoid filament tangling.
- Glossy type finish. Long-term keeping the natural color and luster;
Excellent toughness, More wearable and weathering proof.
Product
PLA (Polylactic acid) is thermoplastic aliphatic polyester made of renewable resources
like corn or starch. Its extrusion-temperature is much lower than
ABS, and most often doesn't require a heated bed. It has the
following characteristics:
Good toughness high strength, high stiffness ;
No block nozzle, good stick hot bed, a smooth PLA used
Can be processed at 185 degrees
Low shrinkage, thermoforming dimensional stability
| Item | PLA Normal filament |
| colors | 65 colors |
| Printing temperature | 190~230°C |
| Bed temperature | 90-110°C |
| Suggestion speed ( mm ) | 60-100mm/s |
| Full Meters (1.75mm) | 396M |
| Dia.Size (mm) | 1.75mm / 2.85mm / 3.0mm |
| Dia Tolerence | ±0.03mm |
| Certification | CE; SGS |
| Brand & Logo | YASIN |
| Web Size | www.yasin3d.com |
| N.W ( kg ) | 1KG/Rolls |
| G.W ( kg ) | 1.5KG/Rolls |
| Advantages | *High strentgh,good toughness,stable in performance; |
Package
Four steps to keep the package safe:Desiccant —› PE bag—›Vaccum
packed—›Inner box;
black spool size : in poly bag(Vacuum packing) with a desiccant bag inside
Filament with spool
Inner box size: 20.8 X 20.8X 7.3cm
I : 4 box/carton carton size : 43.5 X 43.5 X 8cm
II : 8 box/carton carton size : 43.5 X 43.5 X 16.5cm
III : 12 box/carton carton size : 43.5 X 43.5 X 24.5cm
Filament without spool
Inner box size: 18.5*18.5*7cm
12 box/carton carton size : 39*39*23.5cm
Characteristics
1.PLA can be processed in low temperature
2.PLA with 3mm can be processed in 185,PLA tastes like fried corn
With high intensity and stiffness, PLA can print structure parts of
3D printer for DIY users
3.PLA enjoys excellent formability, low thermal denaturation and
only 0.3% shrinkage,
making firm adhesion between layers
3.PLA has bright colors and can be made semi-transparent
4.PLA, as an environment biomaterial is extracted from corn
5.Have good surface gloss and smoothnessSends out noodors in
processing
6.PLA can avoid curling and warping in printing
Service
A1:Are you factory ?
N1: Yes,welcome to visit our factory at any time.
A2:All product have a warranty ?
N2: Yes,all kinds of our products have 1 years warranty at least.
A3:what is the payment terms?
N3: T/T,paypal,alipay etc.
A4:Can we disign package ?
N4: Yes.
A5:Can we print our logo on the product?
N5: Yes,We can do it for you.
A6:Can we customize product?
N6: Yes, OEM&ODM is welcome.
A7:Filament not extruding properly?
N7: Check the type of filament you're working with and set the
proper extruder temperature base on the type and heated build
platform if applicable;trial and error.
Rule of thumb is to set the extruder temperature to the highest
temperature for the specific filament,then decrease the temperature
by 5°C until properly extruded.Please note this will vary with each
3D printer.
